| TECHNICAL DATA SHEET – RM 9606 |
| Mode of Connection |
Phase to Phase connection (OR) Phase to Neutral Connection.
Current via Current Transformer in optional phase. |
| Operating Voltage |
Supply Voltage : 230 Volts ~ / 400 Volts ~
Mains Terminal Voltage : 220 V ~ to 240 V ~ / 380 V ~ to 420 V ~
Absolute permissible / threshold values :198 V~ to 264 V~ / 342 V~ to 462 V~
Note : The terminals for 230 V and 400 V are internally bridged. |
| Frequency |
50 Hz / 60 Hz ( 48 to 62 Hz) |
| Consumption |
Approximately 9-11 VA at 0 to 6 Switched-on control contacts. |
| Current Path |
For Current Transformer …/1A ~ to …/5A ~ |
| Consumption in Current Path |
Max. 1.8 VA at 5 A~ rated current of the CT |
| Control Contacts |
6 potential – free relay contacts |
| Loading capacity of the Control contacts |
Switching Voltage : |
| 380 VAC (according to VDE 0110 part B); 250 VAC(according to VDE 0110 part C) |
| Switching current upto 2 x 5 A max., Switching load upto 1800 VA max. |
| Fault Signal contacts |
Loading capacity as control contacts. |
| No-Voltage Trip (Undervoltage monitoring) |
Voltage loss of longer than 15 ms
|
| Zero Current Trip |
Current loss of longer than 3 secs. |
| Operating Elements |
Foil Keyboard with 4 buttons |
| LED Indicators |
12 LEDs, 4 ½ character digital display |
| Temperature Range |
- 25 Deg. C to + 60 Deg. C |
| Enclosure material |
Black Synthetic Plastic, Flame resistant to UL-94, Class V0 |
| Fastening |
Through the front panel by means of a screwdriver. |
| Front Panel Dimension |
144 mm x 144 mm ( to DIN 43 700 ) |
| Panel Cut Out |
138 mm x 138 mm ( to DIN 43 700 ) |
| Mounting Depth |
40 mm |
| Weight |
Approx. 0.9 Kgs. |
| Terminals |
Plug-in connector blocks (supplied with the control relay) |
| Enclosure Protection |
Terminals – IP 20 ; Casing – IP 54 (when using sealing ring) |
| Design |
VDE 0160, Protection Class II, Insultation Group B (if insulated fixing screws are used) |
| Fusing |
External required. |
