| TECHNICAL DATA SHEET – RM 9806 |
| Mode of Connection |
As given below in the connection circuit diagrams. |
| Operating Voltage |
Supply Voltage : 220 Volts - 240 Volts ~.
Absolute permissible / threshold values :198 V~ to 265 V~. |
| Frequency |
50 Hz / 60 Hz ( 48 to 62 Hz) |
| Consumption |
Approximately 6 VA. |
| Current Path |
For Current Transformer …/1A ~ to …/5A ~. |
| Permissible maximum current : 6 A~ |
| Consumption in Current Path |
Max. 1.8 VA at 5 A~. |
| Measuring Voltage at Terminals “Meas” |
Maximum 265 VAC at terminal “N”. |
| Control Contacts |
6 potential with potential binding to supply voltage (terminal “L”). |
| Loading capacity of the Control contacts |
Total Switching Current : Maximum 4 A.Switching load, max. : 1000 VA |
| No-Voltage Trip (Undervoltage monitoring) |
Voltage loss of longer than 15 ms |
| Zero Current Trip |
Current loss of longer than 3 secs. |
| Discharge time for the capacitor |
Minimum 1 minute |
| Controls |
Keypad with 2 keys |
| Indicator elements |
12 LEDs, 3 character digital display |
| Temperature Range |
- 20 Deg. C to + 60 Deg. C |
| Housing |
Plastic,BalckFlame retardant as per UL-94, Class V0 |
| Mounting |
From the front panel using a screwdriver |
| Front Panel Dimension |
144 mm x 144 mm ( to DIN 43 700 ) |
| Panel Cut Out |
138 mm x 138 mm ( to DIN 43 700 ) |
| Mounting Depth |
40 mm |
| Weight |
Approx. 0.9 Kgs. |
| Connections |
Plug-in by means of terminal strips. |
| Enclosure Protection |
Terminals – IP 20 ; Casing – IP 54 (when using sealing ring) |
| Design |
DIN EN 61010 – 1 (IEC 1010-1), Protection Class II (if insulated fixing screws are used). DIN EN 50081-1; DIN EN 50082-2 |
| Fusing |
External, max. 4A specified. |
